How to launch the old Tomb Raider games and additions to them on a modern computer?

Greetings to you, ladies and gentlemen! Anyone who has already watched the story of the Tomb Raider series and wants to get acquainted with the original games about Lara in the most acceptable form, I present a detailed instruction where we will configure each game and all existing high resolution launches 1920×1080 and with the correct ratio of the parties 16: 9.

This instruction is not a blind copy -paste! Each solution was selected personally by me as the highest quality and simple. All programs are checked, and screenshots were made by me during the testing. Naturally, errors and all sorts of shortcomings may come across here. If something does not work out, as written, complain in the comments, and I will answer in the shortest possible time.

Tomb Raider I

First launch
After installing the Tomb Raider I from the Steam library, we launch it and understand that the first part spreads along with the DOSBOX emulator, through which, in fact, it works.

The trouble is that the original adventure of Lara Croft was never produced for the Windows system, and for its work in the “window” environment, the developers later released a separate patch. But the essence has not changed-the first game functions only if there is MS-DOS around itself.

Total we are greeted by screensavers with a slightly display mode. This mode was often used in old games, because I ignored half of the information from the video (clock lines), thereby reducing the load on the computer resources.

Well, the game itself does not contain graphics settings and is reproduced in resolution 640×480.

At the same time, by default, everything will be stretched not only in height, but also in the width of your monitor, which means that on the modern display the picture will be flattened vertically 25%.

Original
If you want to plunge into the most original atmosphere – with low resolution and proportions 4: 3, it will be enough just to give an order to preserve the pristine ratio of the parties to your video card.

1. Click on the NVIDIA icon on the taskbar with the right mouse button and select “Open NVIDIA control panel”. Or just find it in the Start menu.

2. Next in the list on the left in the “display” section, select “Adjusting the size and position of the desktop”. In the “Scaling” tab, indicate the scaling mode “Image format“and perform scaling on: GP (Graphic processor – GPU). Be sure to click the “Apply” button at the bottom of the window.

3. The program may ask if you are sure of your choice, and will give 15 seconds to the answer. Click “Yes” and close the window.

1. Click the right mouse button on the desktop and select “Radeon settings”. Or just find them in the Start menu.

2. In the window that opens, go to the “display” tab, switch the “scaling of GP” to the stateON“, and the” scaling mode “B”Save the ratio of the parties“.

3. Close the window.

After these actions, Tomb Raider I will look like the original to the original.

Widescreen + Full Soundtrack
In order for the game to show us a picture of high resolution with the correct proportions, you need to do some intricate operations, but the result is worth it.

This method became possible only in 2016, after the fan of the game was able to modify one of the old patches for the ATI 3D Rage video card.

1. Go to the Steam Directory folder. This is usually:

2. There you will see several folders and many files. Feel free to delete everything except the file “Game.GOG“.

3. Change the extension of the file to .ISO, To work out “Game.ISO“.

4. Mount the resulting image using Daemon Tools Lite or any other program. On the resulting disk we are only interested in folders Data And FMV.

5. Copy these two folders to the Directory of the game Tomb Raider (i) In Steam. Then brush the image and delete the file Game.ISO.

6. Download the ATI 3D Rage Patch and unpack the contents of the archive into the folder Tomb Raider (i).

7. Download the latest version of the Glrage converter (File “Glrage_r9.zip “) And we also unpack the game of the game.

8. Download the full version of the soundtrack and unpack into the folder Music, Previously creating it:

9. Download the music converter ZPLAMM and also unpack into the folder Tomb Raider (i).

10. Now we go to the folder Patches And open the file Tombati.ini. There we find a line

and change the value to

Save the file and close. Now during the passage you will hear much more music, as it was in the original version on Sony PlayStation.

11. It remains only to cure the factory marriage of the game – at the last level The Great Pyramid The third secret is not counted. To correct this shortcomings, download TR1 Last Secret Fixer, unpack any place and run TR1LASTSECRETFIXER.EXE. In the opening program, click Open.

12. In the window that appears, find the directory with the game and in the folder Data Select the file LEVEL10C.Phd.

13. Press the button Patch And if everything has passed OK, then close the window and delete the program, as it is no longer needed.

14. Create a shortcut for Tombati.EXE on the desktop and you can run the game.

After the first launch of the modified Tomb Raider I, you will immediately notice the difference as the screensaver. There is no more through construction “savings” – the video is shown in its full resolution.

As soon as the main menu appears, in the section Detail Levels It is worth setting the proper resolution of your monitor and enable “personar” and “Bilinear”.

And the game itself, of course, began to start in 1920×1080 with the correct ratio of the parties 16: 9, and in general it has gained a new, more lively and brighter look. Enjoy your adventures!

Tomb Raider I: UNFINISHED Business

Installation and configuration
Although the addition of UNFINISHED Business was distributed for free, in no digital distribution service it can not be found now even for money. Fortunately, some fan sites stocked up with the necessary files, from where we will get everything you need.

1. Download Tomb Raider I Updater and run. The “Select Setup Language” window will appear. Click OK. Next, click Next. Here we put a checkmill only on Install and Update Tomb Raider I Gold, And click Next.

2. In the next window we remove the checkmark, click Next And then Install. After completing the installation, click Finish.

3. We go into the game folder in Steam.

4. Files appeared there, but of them we only need Gold.GOG.

Attention! If Tomb Raider I has already been installed in this folder, then we transfer the file Gold.GOG In the new folder “Tomb Raider (I) Unfinished Business”, creating it next to. After moving, delete the extra installed files and folders in “Tomb Raider (I)”:

\ Audio
\ Tombraid
DOSBOXTRUB.Conf
Gold.Dat

If the first part was not installed before, then we simply rename this folder into “Tomb Raider (I) Unfinished Business”. All files except Gold.GOG Delete.

5. Rename the file Gold.GOG V Gold.ISO, and delete the rest.

6. We mount the resulting image using Daemon Tools Lite or any other program. There will be two folders on the disk Data And FMV. Both are copied to the Directory of Additions:

7. After that we shake the image and delete Gold.ISO.

8. Next, download the ATI 3D Rage Patch and unpack the contents of the archive in the folder Tomb Raider (I) UNFINISHED Business.

9. Download the latest version of the Glrage converter (File “Glrage_r9.zip “) And we also unpack the game of the game.

10. Download the full version of the soundtrack and unpack into the folder Music, Previously creating it:

11. Download the music converter ZPLAMM and also unpack into the folder Tomb Raider (I) UNFINISHED Business.

12. Now we go to the folder Patches And open the file Tombub.ini. There we find a line

and change the value to

Save the file and close.

13. Create a shortcut for Tombub.EXE on the desktop and we can run the game.

Now we have a completely working addition to UNFINISHED Business, which contains graphic settings.

We set the permission of our monitor, and Perspective and Bilinear put on On. As a result, we see a picture of high resolution 1920×1080 with the correct ratio of the parties 16: 9.

Tomb Raider II

First launch
To begin with, it is worth carrying out educational work with her video card so that it displays the correct proportions of the launched game, or the screensavers will be stretched in width (If you did this earlier, you do not need to repeat the second time).

1. Click on the NVIDIA icon on the taskbar with the right mouse button and select “Open NVIDIA control panel”. Or just find it in the Start menu.

2. Next in the list on the left in the “display” section, select “Adjusting the size and position of the desktop”. In the “Scaling” tab, indicate the scaling mode “Image format“and perform scaling on: GP (Graphic processor – GPU). Be sure to click the “Apply” button at the bottom of the window.

3. The program may ask if you are sure of your choice, and will give 15 seconds to the answer. Click “Yes” and close the window.

1. Click the right mouse button on the desktop and select “Radeon settings”. Or just find them in the Start menu.

2. In the window that opens, go to the “display” tab, switch the “scaling of GP” to the stateON“, and the” scaling mode “B”Save the ratio of the parties“.

3. Close the window.

Now we install Tomb Raider II From Steam. At the first launch, the game gives us the opportunity to set all graphic settings. But this is only at first glance.

Choosing the permission of his monitor and removing the checkmarks from Dither And Triple Buffer, click “OK” and the game starts.

Here we understand that in the second Tomb Raider we will have to correct many problems. Namely:
• Katsets are launched in window mode.

• The game itself is in high resolution, but the image is stretched, and there are black stripes from above and below, which in the game will block the health scale (In fact, this is a frame of an invisible window).

Widescreen + FullScreen

1. First you need to get rid of the window frame arising around the game. To do this, download Tomb Raider Series Fullscreen Border Fix 1.01, extract files from the archive, and start “Install.Bat “(We do not need it anymore, so we delete). Next, we launch the game and see that the katsets are reproduced already without a window frame. Unfortunately, unfortunately, not removed, so we will leave it as it is.

In the game itself, black stripes also disappeared around the perimeter, but the image is still stretched in width on 25%.

2. To correct proportional distortions, download Tomb Raider 2-3-4 Widescreen Patch-Advanced Version and transfer it to the game folder:

3. We launch a patch and a window with the settings opens in front of us.

4. Put a checkmark on the “FOV FIX” parameter and enter the value in the field 350. We also put a box on the “Widescreen Fix” and in the opening list we select 16: 9.

5. Click Go! and in the window that appears, select the Tomb2 file.EXE “. The loading strip should pass twice. After that we see the status of successful completion. Click “Exit”.

6. We remove the patch “Tombraider234_Patch.EXE “ And start the game.

Now Tomb Raider II looks much better. Can be played in high resolution 1920×1080 and with the correct ratio of the parties 16: 9. Pleasant adventures!

Tomb Raider II: The Golden Mask

Installation and configuration
To begin with, it is worth carrying out educational work with its video card so that it displays the correct proportions of the launched game, the credits will be stretched in width (If you did this earlier, you do not need to repeat the second time).

1. Click on the NVIDIA icon on the taskbar with the right mouse button and select “Open NVIDIA control panel”. Or just find it in the Start menu.

2. Next in the list on the left in the “display” section, select “Adjusting the size and position of the desktop”. In the “Scaling” tab, indicate the scaling mode “Image format“and perform scaling on: GP (Graphic processor – GPU). Be sure to click the “Apply” button at the bottom of the window.

3. The program may ask if you are sure of your choice, and will give 15 seconds to the answer. Click “Yes” and close the window.

1. Click the right mouse button on the desktop and select “Radeon settings”. Or just find them in the Start menu.

2. In the window that opens, go to the “display” tab, switch the “scaling of GP” to the stateON“, and the” scaling mode “B”Save the ratio of the parties“.

3. Close the window.

Tomb Raider II: The Golden Mask, like an addition to the first game, was created for free distribution, but now it is not officially downloaded anywhere else. Therefore, we will again turn to fan sites.

1. To begin with, at the following address we create a folder and call it “Tomb Raider (II) The Golden Mask”:

2. We download The Golden Mask additions, unpack the archive in the created folder.

If you run the game right now, then we will see a stretched image and black stripes around the perimeter, blocking the scale of health and breathing.

Correction of errors
First you need to fix https://telbetcasino.co.uk some bugs present in the addition:
• at the entrance to the training level from the main menu, the game crashes.
• To open the fifth bonus level, you need to collect all the secrets in the previous four. But even if you collect all 12 secrets, only 9 counts, and the additional level does not open.
• Music does not play in addition.

1. Download auxiliary files and unpack the archive.

2. First, we correct the error with the Lara’s non -working house. We take from the folder in downloaded files “Lara’s Home Level” File Assault.TR2 and transfer to the folder Data In the catalog with the game:

3. Now let’s fix the broken secret counter. From the “Executable – English” folder, take the file T2Gold.EXE and transfer to the game folder, replacing the original file:

If in the first 4 levels you managed to find all 12 secrets, then after the credits in the New Game menu a bonus level will appear Nightmare in Vegas.

4. Initially, the addition was designed that a disk will be in your disco Tomb Raider II, And the music will be read from there. So, if you run The Golden Mask now, then we will not hear any embabants or beautiful melodies. To dispel the silence, we will copy files from the previously downloaded folder “Audio Solution Dll Files” and insert them into the game directory:

We do the same with files from the UpDated FMV DLL Files folder. We will also throw them to the game.

5. Now let’s download the archive with music, take the Audio folder from it and place the game catalog.

All errors are fixed. Now let’s start repairing the picture.

Widescreen + FullScreen

1. First, get rid of the black frame around the perimeter. Download Windowed Borderless Gaming 2.1.0.1. We place the file from the archive WindowedbORDERARESSGAMING.EXE In the game folder.

2. Launch WindowedbORDERARESSGAMING.EXE And we see how the files appeared among the files Config.ini.

3. Open it in a notebook and replace the entire text for the next and save:

[Global_Config]
AutosetResolution = Never
Defaultdesktopwidth =1920
Defaultdesktopheight =1080
Autosetoffset = Never
Defaultposx = 0
Defaultposy = 0
Keybind1_addwindow = 72
Keybind1_forceborderless = 73
Keybind2_forceborderless = 73
ForcekeyChecktitle = Always
ForCetriggerchecktitle = Always
Addwindow_confirmation = Never
Lastused = Tomb Raider II
[Title: Tomb Raider II; Class: Dude: Tombraiderii: DDWNDCLASS]
Process = T2Gold.EXE
Style = 349110272
Friendlyname = Tomb Raider II

Attention! Enter your resolution of the monitor if it differs from 1920×1080.

4. Next, create a label for a file T2Gold.EXE and put on the desktop. We also create a shortcut for WindowedbORDERARESSGAMING.EXE And we also place it on the desktop. From now on Always We first launch Windowed Borderless Gaming, and then Tomb Raider II The Golden Mask.

They got rid of the black frames and the health scale is visible in the upper left corner. But the image is still stretched in width on 25%.

5. To correct proportional distortions, download Tomb Raider 2-3-4 Widescreen Patch-Advanced Version and transfer it to the game folder:

6. We launch a patch and a window with the settings opens in front of us.

7. Put a checkmark on the “FOV FIX” parameter and enter the value in the field 350. We also put a box on the “Widescreen Fix” and in the opening list we select 16: 9.

8. Click Go! and in the window that appears, select the “T2Gold.EXE “. The loading strip should pass twice. After that we see the status of successful completion. Click “Exit”.

9. We remove the patch “Tombraider234_Patch.EXE “.

Now high -resolution picture 1920×1080, and the ratio of the parties has changed to the correct 16: 9. Pleasant adventures!

Tomb Raider III

First launch
To begin with, it is worth carrying out educational work with her video card so that it displays the correct proportions of the launched game, or the screensavers will be stretched in width (If you did this earlier, you do not need to repeat the second time).

1. Click on the NVIDIA icon on the taskbar with the right mouse button and select “Open NVIDIA control panel”. Or just find it in the Start menu.

2. Next in the list on the left in the “display” section, select “Adjusting the size and position of the desktop”. In the “Scaling” tab, indicate the scaling mode “Image format“and perform scaling on: GP (Graphic processor – GPU). Be sure to click the “Apply” button at the bottom of the window.

3. The program may ask if you are sure of your choice, and will give 15 seconds to the answer. Click “Yes” and close the window.

1. Click the right mouse button on the desktop and select “Radeon settings”. Or just find them in the Start menu.

2. In the window that opens, go to the “display” tab, switch the “scaling of GP” to the stateON“, and the” scaling mode “B”Save the ratio of the parties“.

3. Close the window.

It is important to remember, that Tomb Raider III does not like when some other programs are open during its launch, so browsers, “offices” and all sorts of “photoshops” should first be closed.

1. After installing Tomb Raider III from Steam, we go to the game directory and delete the file Config.TXT.

2. Now we launch Tomb3.EXE and we see the settings window in which we select the resolution of 1920×1080 we need and turn off all the graphic options. Click OK.

3. Now we are waiting for the start of the game, but after getting into the main menu we immediately leave it.

4. Now we open the file that appears Config.TXT Using a notebook and change some values ​​to improve the picture:

ATTENTION! It is strictly not recommended to change values ​​through Detail Options in the main menu of the game, as this can lead to an error. If this happens, then just delete the file Config.TXT and do all the above actions re -.

Now if we run the Tomb Raider III, we will see that the resolution of the game has changed to a high, however, the image is stretched in width on 25%.

Widescreen + Full Soundtrack + Bug Fix

1. To begin with, it is worth noting that during the development of Tomb Raider III, special music was written for the battle with the last boss, which for some mysterious reason did not fall into the game itself. To enjoy the final in full, download the full version of the soundtrack and the file Cdaudio.WAD We transfer from the archive to the Audio folder in the game directory, replacing the original.

2. Then download the edited files of intra -game screensaver to eliminate bugs. Unpack the archive and transfer all the files from the archive to the folder Cuts, Replacing originals:

3. Next, download the third part of the corrections of bugs and distortions of the textures and the entire contents of the “With Crystals” folder to the folder Data In the Directory of the game, agreeing to replace:

4. To correct proportional distortions, download Tomb Raider 2-3-4 Widescreen Patch-Advanced Version and transfer it to the game folder:

5. We launch a patch and a window with the settings opens in front of us.

6. Put a checkmark on the “FOV FIX” parameter and enter the value in the field 350. We also put a box on the “Widescreen Fix” and in the opening list we select 16: 9.

7. Click Go! and in the window that appears, select the Tomb3 file.EXE “. The loading strip should pass twice. After that we see the status of successful completion. Click “Exit”.

8. We remove the patch “Tombraider234_Patch.EXE “.

Now the final music has been added, all bugs are fixed, and the picture in high resolution 1920×1080 and with the correct ratio of the parties 16: 9.

Tomb Raider III: The Lost Artifact

Installation and launch
To begin with, it is worth carrying out educational work with her video card so that it displays the correct proportions of the launched game, or the screensavers will be stretched in width (If you did this earlier, you do not need to repeat the second time).

1. Click on the NVIDIA icon on the taskbar with the right mouse button and select “Open NVIDIA control panel”. Or just find it in the Start menu.

2. Next in the list on the left in the “display” section, select “Adjusting the size and position of the desktop”. In the “Scaling” tab, indicate the scaling mode “Image format“and perform scaling on: GP (Graphic processor – GPU). Be sure to click the “Apply” button at the bottom of the window.

3. The program may ask if you are sure of your choice, and will give 15 seconds to the answer. Click “Yes” and close the window.

1. Click the right mouse button on the desktop and select “Radeon settings”. Or just find them in the Start menu.

2. In the window that opens, go to the “display” tab, switch the “scaling of GP” to the stateON“, and the” scaling mode “B”Save the ratio of the parties“.

3. Close the window.

Unlike additions to Tomb Raider I and Tomb Raider II, The Lost Artifact It has not been distributed for free, however, it is no longer sold in any licensed store, so you have to resort to fan loading.

It is important to remember, that Tomb Raider III: The Lost Artifact does not like it when some other programs are open during its launch, so browsers, offices and all sorts of “photoshops” should first be closed.

1. Install Tomb Raider III From Steam.

2. We create a folder for complementing next to the third game:

3. Download the image of the Lost Artifact disk and mount using Daemon Tools Lite or other program.

4. We take these files and folders from the image and copy to the created directory:

5. We shake the image and delete. We no longer need him.

6. From the folder with Tomb Raider III Take files

and copy to the folder with addition.

7. Download the set of corrections, remove all the files from the archive and transfer to the DATA folder, replacing the originals.

8. Rename the file there TRTLA.Dat V Tombpc.Dat

9. Now we launch Tomb3.EXE and we see the settings window in which we select the resolution of 1920×1080 we need and turn off all the graphic options. Click OK.

10. Now we are waiting for the start of the game, but after getting into the main menu we immediately leave it.

11. Now we open the file that appears Config.TXT Using a notebook and change some values ​​to improve the picture:

ATTENTION! It is strictly not recommended to change values ​​through Detail Options in the main menu of the game, as this can lead to an error. If this happens, then just delete the file Config.TXT and do all the actions starting from the point “9” Reveal.

12. Create a shortcut for Tomb3.EXE and put on the desktop.

Launch The Lost Artifact and we see that the game opens in high resolution 1920×1080 and with the correct ratio of the parties 16: 9.

Tomb Raider IV: The Last Revelation

First launch
To begin with, it is worth carrying out educational work with her video card so that it displays the correct proportions of the launched game, or the screensavers will be stretched in width (If you did this earlier, you do not need to repeat the second time).

1. Click on the NVIDIA icon on the taskbar with the right mouse button and select “Open NVIDIA control panel”. Or just find it in the Start menu.

2. Next in the list on the left in the “display” section, select “Adjusting the size and position of the desktop”. In the “Scaling” tab, indicate the scaling mode “Image format“and perform scaling on: GP (Graphic processor – GPU). Be sure to click the “Apply” button at the bottom of the window.

3. The program may ask if you are sure of your choice, and will give 15 seconds to the answer. Click “Yes” and close the window.

1. Click the right mouse button on the desktop and select “Radeon settings”. Or just find them in the Start menu.

2. In the window that opens, go to the “display” tab, switch the “scaling of GP” to the stateON“, and the” scaling mode “B”Save the ratio of the parties“.

3. Close the window.

It is important to remember, that Tomb Raider IV: The Last Revelation does not like when some other programs are open during its launch, so browsers, “offices” and all sorts of “photoshops” should first be closed.

1. Installing Tomb Raider IV: The Last Revelation from Steam and immediately starting, we see a window with settings. Choose the right resolution 1920×1080, We turn on 32-bit textures and set the checkmarks on graphic effects.

2. Click “OK” and the game starts.

The game due to incompatibility of window styles starts in the window.

The resolution is high, but there are window frames and the picture is stretched along the width on 25%.

Widescreen + Fullscreen + Bug Fix

1. First, get rid of the window frame. To do this, download Tomb Raider Series Fullscreen Border Fix 1.01, extract files from the archive, and start “Install.Bat “(We do not need it anymore, so we delete). Next, we launch the game and see that the katsets are reproduced already without a window frame.

There is no longer a framework in the game itself, but the image is still stretched.

2. In the original version of the game, when Lara pushes in the holster “ultrasound” or revolver, the weapon disappears, and Lara runs with empty holsters. To correct this bug, download Holster Fix, unpack and transfer from the Files folder Tomb4.EXE in the game folder, replacing the original.

3. To correct proportional distortions, download Tomb Raider 2-3-4 Widescreen Patch-Advanced Version and transfer it to the game folder:

4. We launch a patch and a window with the settings opens in front of us.

5. Put a checkmark on the “FOV FIX” parameter and enter the value in the field 350. We also put a box on the “Widescreen Fix” and in the opening list we select 16: 9.

6. Click Go! and in the window that appears, select the Tomb4 file.EXE “. The loading strip should pass twice. After that we see the status of successful completion. Click “Exit”.

7. We remove the patch “Tombraider234_Patch.EXE “.

Now Tomb Raider IV: The Last Revelation Starting in high resolution 1920×1080 and with the correct ratio of the parties 16: 9.

Tomb Raider IV: The Times Exclusive Level

Installation and launch

Addition The Times Exclusive LEVEL It was distributed for free, along with the newspaper The Times, and now it can only be downloaded on fan sites.

It is important to remember, that Tomb Raider IV: The Times Exclusive LEVEL does not like when some other programs are open during its launch, so browsers, “offices” and all sorts of “photoshops” should first be closed.

1. We create the folder “Tomb Raider (IV) The Times Exclusive LEVEL” in the Steam Directory

2. Download the original The Times Exclusive LEVEL (from the section Tomb Raider 4 Bonus Levels – PC Times Exclusive LEVEL 33 MB) And in the properties of the file, on the “Compatibility” tab, put a checkplace on “Run the program in combinability mode with:” and from the list select “Windows 98 / Windows Me”.

3. Click “OK” and launch TR4_Times.EXE. In the window that appears, click “Setup”.

4. We continue the installation, and when the program asks the address where the game will be installed, click Browse and indicate the folder “Tomb Raider (IV) The Times Exclusive LEVEL”.

5. Click “Next” and at the end of the installation, remove the checkplace with “Play”. Then click “Finish”.

6. Having launched the game, we see a window with settings. Choose the right resolution 1920×1080, We turn on 32-bit textures and set the checkmarks on graphic effects.

7. Click “OK” and the game starts.

Widescreen + Fullscreen + Bug Fix
The addition is installed. But now you need to eliminate some bugs and align the picture to modern monitors.

1. In order for the arrow of the crossbow to be displayed correctly, download the corrected file and place it in the folder Data in the Directory of the game, replacing the original.

C: \ Program Files (X86) \ Steam \ Steamapps \ Common \ Tomb Raider (IV) The Times Exclusive LEVEL \ DATA \Times.TR4

2. So that Lara’s speech in the screensaver does not break off at half -word, download the corrected audio file and place it in the folder Audio, Also replacing the original.

C: \ Program Files (X86) \ Steam \ Steamapps \ Common \ Tomb Raider (IV) The Times Exclusive LEVEL \ AUDIO \044_attack_part_i.WAV

3. To fix the absence of an “ultrasound” or a revolver in the holsters of Lara, download Holster Fix, plow and transfer the file from the Files folder Tomb4.EXE to the directory with addition, replacing the original.

4. Now get rid of the window frame. To do this, download Tomb Raider Series Fullscreen Border Fix 1.01, extract files from the archive, and start “Install.Bat “(We do not need it anymore, so we delete).

5. To correct proportional distortions, download Tomb Raider 2-3-4 Widescreen Patch-Advanced Version and transfer it to the game folder:

6. We launch a patch and a window with the settings opens in front of us.

7. Put a checkmark on the “FOV FIX” parameter and enter the value in the field 350. We also put a box on the “Widescreen Fix” and in the opening list we select 16: 9.

8. Click Go! and in the window that appears, select the Tomb4 file.EXE “. The loading strip should pass twice. After that we see the status of successful completion. Click “Exit”.

9. We remove the patch “Tombraider234_Patch.EXE “.

Now Tomb Raider IV: The Times Exclusive Level Starting in high resolution 1920×1080 and with the correct ratio of the parties 16: 9.

Tomb Raider: Chronicles

First launch
To begin with, it is worth carrying out educational work with her video card so that it displays the correct proportions of the launched game, or the screensavers will be stretched in width (If you did this earlier, you do not need to repeat the second time).

1. Click on the NVIDIA icon on the taskbar with the right mouse button and select “Open NVIDIA control panel”. Or just find it in the Start menu.

2. Next in the list on the left in the “display” section, select “Adjusting the size and position of the desktop”. In the “Scaling” tab, indicate the scaling mode “Image format“and perform scaling on: GP (Graphic processor – GPU). Be sure to click the “Apply” button at the bottom of the window.

3. The program may ask if you are sure of your choice, and will give 15 seconds to the answer. Click “Yes” and close the window.

1. Click the right mouse button on the desktop and select “Radeon settings”. Or just find them in the Start menu.

2. In the window that opens, go to the “display” tab, switch the “scaling of GP” to the stateON“, and the” scaling mode “B”Save the ratio of the parties“.

3. Close the window.

It is important to remember, that Tomb Raider: Chronicles does not like when some other programs are open during its launch, so browsers, “offices” and all sorts of “photoshops” should be first closed.

1. Installing Tomb Raider: Chronicles from Steam and immediately starting, we see a window with settings. Choose the right resolution 1920×1080, We turn on 32-bit textures and set the checkmarks on graphic effects.

2. Click “OK” and the game starts.

The game due to incompatibility of window styles starts in the window.

The resolution is high, but there are window frames and the viewing angle is slightly cut. Although the picture is not stretched by width.

Widescreen + FullScreen

1. First, get rid of the window frame. To do this, download Tomb Raider Series Fullscreen Border Fix 1.01, extract files from the archive, and start “Install.Bat “(We do not need it anymore, so we delete). Next, we launch the game and see that the katsets are reproduced already without a window frame.

There is no longer a framework in the game itself, but the field of view is a little narrow.

2. To expand the angle of view (FOV), download Tomb Raider 2-3-4 Widescreen Patch-Advanced Version and transfer it to the game folder:

3. We launch a patch and a window with the settings opens in front of us.

4. Put a checkmark on the “FOV FIX” parameter and enter the value in the field 350. Nothing else needs to be exhibited.

5. Click Go! and in the window that appears, select the Tomb4 file.EXE “. The loading strip should pass twice. After that we see the status of successful completion. Click “Exit”.

6. We remove the patch “Tombraider234_Patch.EXE “.

Now Tomb Raider: Chronicles Starting in high resolution 1920×1080 and with the correct ratio of the parties 16: 9.

Tomb Raider: The Angel of Darkness

First launch
To begin with, it is worth carrying out educational work with her video card so that it displays the correct proportions of the launched game, or the screensavers will be stretched in width (If you did this earlier, you do not need to repeat the second time).

1. Click on the NVIDIA icon on the taskbar with the right mouse button and select “Open NVIDIA control panel”. Or just find it in the Start menu.

2. Next in the list on the left in the “display” section, select “Adjusting the size and position of the desktop”. In the “Scaling” tab, indicate the scaling mode “Image format“and perform scaling on: GP (Graphic processor – GPU). Be sure to click the “Apply” button at the bottom of the window.

3. The program may ask if you are sure of your choice, and will give 15 seconds to the answer. Click “Yes” and close the window.

1. Click the right mouse button on the desktop and select “Radeon settings”. Or just find them in the Start menu.

2. In the window that opens, go to the “display” tab, switch the “scaling of GP” to the stateON“, and the” scaling mode “B”Save the ratio of the parties“.

3. Close the window.

The sixth game of the series Tomb Raider: The Angel of Darkness Very amused and cut. However, many tools and missing graphic elements are in the game files, and they just need to be activated.

1. Install the game through Steam and run. Before us appears a menu where we select the “Settings” item to get into the settings.

2. Choose a tab with the name of our video card, and set the desired resolution 1920×1080, The depth of color 32 Bit, The ratio of the parties 1.78 (16: 9), put a box on “FOG” and Necessarily on “VMR9”, otherwise the game will not even start.

3. Below you can increase some other graphic indicators, but we will not do this. Click “OK”. And then “Exit”.

We don’t launch the game yet, but if we start, the picture will already be in high resolution 1920×1080 and with the ratio of the parties 16: 9.

BUG FIX
You can already play the Angel of Darkness, but at first it is recommended to fix the most terrible bugs that may prevent you from enjoying the game in full.

1. Download tr AOD UPDATER, remove the file from the archive trad_updater.EXE And run. A window selection window will appear in front of us. Choose “English” and click “OK”.

2. Then click “Next”, and in the next window, select the necessary elements of the update.

3. Click “Next” and set the “Install” button. Then remove the checkmark from the point “Start Game.”And click” Finish “.

4. Download the patch that corrects control and includes inactive effects (snow, blood, etc.D.), unpack the archive and transfer the file Trad_p4.EXE in the Bin folder in the Directory of the game, replacing the original.

C: \ Program Files (X86) \ Steam \ Steamapps \ Common \ Tomb Raider (VI) The Angel of Darkness \ Bin \ Bin \ Bin \trad_p4.EXE

5. Next, download the fixed files with data that corrects many bugs and distortions of textures on locations and characters. We unpack the archive and transfer the entire Data folder to the game folder, agreeing to replace the files.

6. Download the adjusted Kitzen files with Lara’s outfit corrections. We unpack the archive and also transfer the Data folder to the Directory of the game, replacing the originals. After that, delete files Lara.Chr And LARAC1.Chr From the folder “. \ DATA \ Char \ “.

7. For another series of corrections on locations (in particular, adjusting invisible textures), download all these files:

and transfer to the “Data \ Maps \” folder, replacing the originals.

8. Then download the Kitszen files:

and transfer to the Data \ Maps \ Cutscene folder, replacing the originals.

C: \ Program Files (X86) \ Steam \ Steamapps \ Common \ Tomb Raider (VI) The ANGEL of Darkness \ Data \ Maps \ Cutscene \

9. Now download the characters’ files:

and transfer to the “Data \ Char \” folder, replacing the originals.

10. And one more correction that allows the herbal’s lips to move during the conversation. Unpack the archive and transfer Paris2d.GMX.CLZ In the “Data \ Maps \” folder, reducing the existing file.

Now you can play more or less corrected Tomb Raider: The Angel of Darkness In high resolution 1920×1080, with the correct ratio of the parties 16: 9 and a certain number of corrected bugs.

Thank you for your attention, ladies and gentlemen! I hope that this instruction helped you again plunge into the atmosphere of ancient secrets, fatal traps and untouched tombs of the original classic Tomb Raider series, sitting behind a modern computer. Waiting for your reviews And I will definitely help in solving the problems that have arisen. I will also be glad to some comments and proposals to improve this leadership.

Tomb Raider (1996)

Tomb Raider II

Tomb Raider III: The Lost Artifact

Tomb Raider IV: The Last Revelation

Tomb Raider: Chronicles

Tomb Raider: The Angel of Darkness

The best comments

I see that I did a great job, hold a big plus straight.
I already wanted to download The Angel of Darkness and play the corrected version of the game, although the developers should be corrected, not users: 3

He is there, but he stretches the image of Tomb Raider I in width. And there is such a thing that it was not technically impossible to change the Aspect Ratio in the game until last year. Until a good fellow, some rare patch, on the basis of which he wrote his, so to speak, port 🙂 What, by the way, was very pleased with me. See the first game in such a modern “robe” is very cool 🙂

Here is a great chance for me to double -check a couple of good games from childhood))
P.S. well, or then it seemed to me … Let’s check

Such an instruction, yes for The Dark Alliance (PS2). After all, I somehow managed to launch her in the custom almost-phullHD resolution while maintaining proportions … Eh ..
P.S. Stopgame-Kosar to the author! +Prize

Ehh, if only such instructions were released more often, because I have a whole bunch of old games on new systems so easy not to start.
For a couple of years I can’t normally run Alien Logic under DOS. At first I fought for a long, long time to make the game set and start through DosBox. Now I can’t understand how to launch the same game, having saved the inserted disc through Dosbox without installing the game again, because then saving is erased. And this, damn it, a huge RPG and such a problem is critical for passing! And if there is, albeit without rollers and sounds, but still the image of an already established game, then for Alien Logic-no.
I even tried to play online emulator. But there was the same problem with preservations: during the new entrance to the game they are not ..

Closer to the weekend, I’ll try to play from the gamepad, and there you look and unsubscribe how the game behaved on my personal computer. WITH:

Hello! I am very glad that the history of the series liked, perhaps one day there will be a sequel 🙂
The idea of ​​expanding the article took into account. I will definitely do this, but first of all, you need to pave the article on compatibility with Windows 10, otherwise some things no longer work on it, unfortunately. I will do this in the coming months, probably 🙂

Useful, very useful. And I already download different versions from torrents, because Steimovs do not work normally.

Yes, I used it before, but she, unfortunately, does not know how to change the ratio of the parties in the first part. Only increase resolution 🙁